Strip, repair and reseal tired pavers
Paver Restoration and Resealing in Riverside, FL
Ring (904) 543-3876 for a free paver restoration estimate at your Riverside property.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Who handles paver restoration in Riverside, and how soon do they reply?
Yes, a local contractor restores and reseals pavers across Riverside, FL, and you will have an answer within 1 business day, usually much sooner. The estimate costs nothing and you can say no afterward. Phone (904) 543-3876 to start.
Restoration is the job for pavers that have gone beyond a simple wash: old sealer that turned cloudy or peels, joints emptied by rain, stains layered on stains, edges that tilt. The work strips what failed, repairs what moved and applies a fresh coat to a clean, dry surface. Describe what you see when you book a free estimate, and the reply spells out the plan.
Which nearby places can book paver restoration?
Riverside homes and every place listed below can ask for a restoration visit, and each place has a page of local notes. Want to confirm your street? Call (904) 543-3876.
- San Marco
- Royal Terrace
- Brentwood
- Paxon
- Panama Park
- Ortega
- Arlington
- Southside
- Arlington Hills
- San Jose
- Argyle Forest
- Beauclerc
- Bellair-Meadowbrook Terrace
- Sandalwood
- Whitehouse
- Fort Caroline
- Dinsmore
- Mandarin
- Highlands
- San Pablo
- Lakeside
- Oakleaf Plantation
- Fleming Island
- Oceanway
- Fruit Cove
- Baymeadows
- Atlantic Beach
- Jacksonville Beach
- Palm Valley
Do I need restoration, or only a fresh coat of sealer?
The old coating decides. A regional stripping company says pavers that look white, hazy or peeling need the old sealer removed first, while pavers that merely look faded after a coat wore off can take a standard clean and reseal. Three situations cover most Riverside driveways and courtyards. Find out which one fits yours by calling (904) 543-3876.
Strip first, then seal
White or milky haze, coating that peels or bubbles, a plastic-looking gloss, or a finish that went cloudy within months of the last job.
Clean and reseal
Pavers that look dull or faded because an old coat wore away on its own, with water that now soaks in instead of beading.
Reset, then everything else
Edges that tilt, dips that hold water or joints that keep emptying. Sealer cannot lift a paver or fill a hollow base.
Why can't new sealer go over a peeling coat?
Because it traps the trouble underneath. A Northeast Florida paver company lists sealing over failed sealer among the common myths, noting that the new layer simply peels again, so a careful contractor strips first. Fresh sealer needs a clean, dry bond with the paver itself. Ask how any quote handles old coating when you book a free estimate.
Stripping sounds harsh but leaves the paver untouched. According to a regional stripping company, it takes off the film, not the color, and the surface looks raw and natural until the new coat goes on. Compare that plan with others by ringing (904) 543-3876.
What causes white haze and flaking on older pavers?
Two different problems look alike. A paver maker explains that efflorescence is a dry white powder, usually harmless, that fades from view when the surface is wet. Milky or glassy patches that appear after sealing point to sealer blush or trapped moisture, and the maker says to stop resealing and get advice. Photos of both help when you book a free estimate.
Humidity feeds the second kind. A regional stripping company says a solvent-based coat that goes white within the first months is almost always failing in local humidity. Ask a contractor to look before more product goes down, and call (904) 543-3876 to arrange it.
How do older pavers in Riverside lose their sand and their color?
Rain does most of it. Wikipedia puts the area at about 52 inches a year, much of it in hard downpours from May to September, and sprinklers add water all year. Joints empty, pavers shift and bare surface fades in the sun. Riverside's oak shade slows fading but keeps surfaces damp. Mention where water goes after a storm when you book a free estimate.
Sand choice matters too. A Duval County paver company argues that polymeric sand struggles in Florida's rain and humidity because it needs a dry spell to set, and it pairs plain sand with a flood coat of sealer. Not every company agrees, so ask what yours plans to use, and ring (904) 543-3876 with questions.
Do tilted or sunken pavers get fixed during restoration?
They should, since sealer cannot lift a paver or fill a hollow base. Oak roots slowly push edges upward in older yards, and water sitting in a dip loosens more bedding each season. Resetting means lifting the pavers, leveling the base and laying them back, which is why it shows up as its own line in a quote. See what your surface needs by calling (904) 543-3876.
Replacement is the fallback, not the first move. A regional stripping company puts replacement at $15 to $30 per square foot or more, and it says restoration of sound pavers costs a fraction of that. Ask for both numbers when you book a free estimate.
What is the paver restoration process from start to finish?
Most jobs run through five steps, and drying time between them is what stretches the day. Skipping a step is how restorations fail early. Book yours by calling (904) 543-3876.
1. Inspect and mark
The contractor maps the area, notes the old coating type, flags tilted pavers and root lift, and decides how many strip passes it needs.
2. Protect and strip
Garage doors, screens and beds are covered, because stripper removes paint and coatings it touches. The old sealer is lifted down to bare paver.
3. Wash and treat
The surface is rinsed, then stains and green growth get their own treatment before everything is left to dry.
4. Reset and re-sand
Loose or sunken pavers are lifted and rebedded, and clean sand is swept into every joint and settled.
5. Reseal and walk through
A fresh coat goes on dry pavers in your chosen finish, and the contractor names how long to stay off and when cars can return.
How long does a restoration take, and when can I use the pavers again?
A regional stripping company says most strip and reseal jobs take one full day. Walking is usually fine after about 24 hours, and driving waits another day or two, 48 to 72 hours in all, depending on weather and the product. Rain during the dry-out can push the sealing step to a second day. Ask for your own timing when you book a free estimate.
Which finish should my restored pavers get?
Four finishes are common: a high-gloss wet look, a satin wet look, a natural matte and a soak-in stone finish, according to one Northeast Florida company that lists all four. Gloss deepens color the most, and matte stays closest to new. Older brick often looks right with less sheen, and pool decks do better with grip than shine. Look at samples by calling (904) 543-3876.
What does paver restoration cost in Riverside?
A restoration price stacks two published pieces. A Duval County price guide adds $0.75 to $1.50 per square foot when failed sealer has to come off, and a regional washing company posts $1.75 to $3.25 per square foot to clean, sand and seal. That same guide quotes stripping jobs from $350 for small areas up to $3,400 or more for large ones. No single page lists a restoration rate, so the table adds the pieces. book a free estimate for a number on your pavers.
Beware of the bargain. The price guide says bids below $1 per square foot almost always skip prep, and restoration is mostly prep. Hold quotes up against the table, or ring (904) 543-3876.
For a plain coat over sound pavers, read the paver sealing page. You can also see every place listed or return to the Riverside home page.
| Paved area | Strip failed sealer ($0.75 to $1.50) | Clean, sand and seal ($1.75 to $3.25) | Both together |
|---|---|---|---|
| 400 sq ft | $300 to $600 | $700 to $1,300 | $1,000 to $1,900 |
| 800 sq ft | $600 to $1,200 | $1,400 to $2,600 | $2,000 to $3,800 |
| 1,200 sq ft | $900 to $1,800 | $2,100 to $3,900 | $3,000 to $5,700 |
Both rates are published for the area: the strip add-on comes from a Duval County price guide and the clean, sand and seal range from a regional washing company. The last column adds them. Resetting tilted pavers, extra sand and repairs are quoted separately, and large areas often price lower per foot.
What should I ask a contractor about restoring old pavers?
Ask what is under the old coat, how many strip passes are planned and how the stripper is kept off the house, screens and plants. Ask whether sand is included and who resets any tilted pavers. A written answer to each makes quotes easy to compare. Start the list by calling (904) 543-3876.
Ready to bring tired Riverside pavers back?
Use the short form or phone in. A local company writes back within 1 business day, usually much sooner, and the visit is free.
Free, no obligation
What do restored pavers look like in Riverside?
Frequently Asked Questions
How much do people charge to seal pavers?
Regional price guides sit around $1.25 to $3.25 per square foot for a full clean and seal, with one company posting sealing alone from $1.90. A restoration costs more than a plain reseal because stripping adds roughly $0.75 to $1.50 per square foot.
How to rejuvenate old pavers?
Start by finding out what is wrong: algae and dirt call for a wash, a failed coat calls for stripping, and empty joints call for sand. Often it takes all three in order, followed by a new coat once everything is dry.
How to refurbish old pavers?
A refurbish usually means cleaning, treating stains, resetting anything that has tilted, refilling the joints and sealing. Skipping the reset or the drying time is what makes a refresh fade early.
Is it good to seal pavers in Florida?
Generally yes, because the sun and the rain here both work on bare pavers. The catch is that a coat wears, so every restoration ends with a schedule for the next one.
Why is paver sealing so expensive?
Most of the price is labor and drying time, not the sealer. A restoration adds stripping and joint work, and a Duval County price guide warns that very low bids usually leave prep out.
Does stripping take the color out of my pavers?
No. A regional stripping company says the process removes the coating, not the color of the paver, and the tone returns once a new sealer goes on over the clean surface.
How long does paver restoration take?
A regional stripping company says most strip and reseal jobs run one full day, with foot traffic allowed after about 24 hours and vehicles after 48 to 72 hours depending on weather and product.
Can aged brick pavers at an older Riverside home be restored?
Often, when the bricks themselves are sound. Soft or cracked bricks are replaced or reset first, and a test patch shows how the old surface reacts before the whole area is stripped or washed.
When are pavers too far gone to restore?
When the pavers are cracked or broken rather than just worn. A regional company puts full replacement at $15 to $30 per square foot or more, so restoring a sound surface usually costs far less.
Does a restoration include new joint sand?
It normally does, since stripping and washing pull sand out of the gaps. The quote should name the sand and say whether it is part of the square foot price.
Give worn-out pavers a second life
Name your street or ZIP and the problem you see. A reply comes within 1 business day, usually much sooner, with no pressure to book.
Free, no obligation